Kipp&Zonen COMBILOG Data Logger - Manual (Page 21)

Description of the parts:
Number Description Number Description
1 USB 9 Module jack connection
2 Ethernet 10 LED ERR (red)
3 Voltage supply 11 LED RUN (green)
4 Power switch 12 Ethernet Link / Traffic
5 RS485 13 Press/rotary knob
6 RS232 14 8 analogue inputs
7 6 digital I/Os 15 LC-display
8 Status-LEDs for digital I/Os 16 Interface for memory card
Table 3.1 Description of the parts on the front of the device
Pin assignment:
Terminal Assignment Terminal Assignment
+10..30V Voltage supply + I/O + Digital I/O 1…6
0V Voltage supply - 0 V Ground for digital I/Os
A RS485-bus interface A SOURCE Source output
B RS485-bus interface B In+ Analogue input +
RX RS232 receive In- Analogue input -
TX RS232 transmit AGND Ground for analogue input
COM RS232 ground UOUT 1 / 2 Power switch output
Table 3.2 Pin assignment
Hardware Manual COMBILOG 1022
21