Kipp&Zonen COMBILOG Data Logger - Manual (Page 74)

6.3.1 Remove Card
If a SD-card is configured as logging destination the card has
to be logged off of the system before removing it. Otherwise
written data can be lost.
For card removal you choose this menu item. The card will be
logged out of the system without any further question.
6.3.2 Firmware Update
Using the menu item 'update files' one can start the firmware
update procedure. Therefore a special firmware update file
must reside in the directory 'updates' on the SD-card.
After choosing ' update files' all files in the directory 'updates'
are presented for selection.
Selecting one file starts the update procedure after a security
question. If the file contents for some reason seems to be cor-
rupted, the firmware update stops. If there was no error during
file checking the data logger starts the reprogramming and
starts a system reboot during which the new image is written
into the program flash.
Warning:
As a firmware update is a critical process a backup of all logged
data and of the configuration is highly recommended!
Hardware Manual COMBILOG 1022 74