Interlogix NS3702-24P-4S User Manual - Manual (Page 66)

66
4.2.15 SMTP Configuration
This Page facilitates an SMTP Configuration on the switch. The SMTP Configure screen in Figure 4-2-18 appears.
Figure 4-2-18: SMTP Configuration Page Screenshot
The Page includes the following fields:
Object Description
 SMTP Mode Controls whether SMTP is enabled on this switch.
 SMTP Server Type the SMTP server name or the IP address of the SMTP server.
 SMTP Port Set port number of SMTP service.
 SMTP Authentication Controls whether SMTP authentication is enabled If authentication is required
when an e-mail is sent.
 Authentication User
Name
Type the user name for the SMTP server if Authentication is Enable.
 Authentication
Password
Type the password for the SMTP server if Authentication is Enable.
 E-mail From Type the sender’s E-mail address. This address is used for reply e-mails.
 E-mail Subject Type the subject/title of the e-mail.
 E-mail 1 To
 E-mail 2 To
Type the receiver’s e-mail address.