Interlogix NS3702-24P-4S User Manual - Manual (Page 202)

202
4.9.5.1 QoS Egress Port Schedule and Shapers
The Port Scheduler and Shapers for a specific port are configured on this Page. The QoS Egress Port Schedule and Shaper
sscreen in Figure 4-9-5 appears.
Figure 4-9-5: QoS Egress Port Schedule and Shapers Page Screenshot
The Page includes the following fields:
Object Description
 Schedule Mode Controls whether the scheduler mode is "Strict Priority" or "Weighted" on this
switch port.
 Queue Shaper Enable Controls whether the queue shaper is enabled for this queue on this switch port.
 Queue Shaper Rate Controls the rate for the queue shaper.
This value is restricted to 100-1000000 when the "Unit" is "kbps", and it is
restricted to 1-13200 when the "Unit" is "Mbps".
The default value is 500.
 Queue Shaper Unit Controls the unit of measure for the queue shaper rate as "kbps" or "Mbps".
The default value is "kbps".