Interlogix NS3702-24P-4S User Manual - Manual (Page 55)

55
to identify the time zone. ( Range : Up to 16 characters )
 Daylight Saving Time This is used to set the clock forward or backward according to the configurations
set below for a defined Daylight Saving Time duration. Select 'Disable' to disable
the Daylight Saving Time configuration. Select 'Recurring' and configure the
Daylight Saving Time duration to repeat the configuration every year. Select
'Non-Recurring' and configure the Daylight Saving Time duration for single time
configuration. ( Default : Disabled ).

Start Time Settings
 Week - Select the starting week number.
 Day - Select the starting day.
 Month - Select the starting month.
 Hours - Select the starting hour.
 Minutes - Select the starting minute.
 End Time Settings  Week - Select the ending week number.
 Day - Select the ending day.
 Month - Select the ending month.
 Hours - Select the ending hour.
 Minutes - Select the ending minute

Offset Settings
Enter the number of minutes to add during Daylight Saving Time. ( Range: 1 to
1440 )
Buttons
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.
4.2.8 UPnP
Configure UPnP on this Page. UPnP is an acronym for Universal Plug and Play. The goals of UPnP are to allow devices to connect
seamlessly and to simplify the implementation of networks in the home (data sharing, communications, and entertainment) and in
corporate environments for simplified installation of computer components. The UPnP Configuration screen in Figure 4-2-10
appears.