Interlogix NS3702-24P-4S User Manual - Manual (Page 373)

373
4.18.5 RMON History Configuration
Configure RMON History table on this Page. The entry index key is ID; screen in Figure 4-18-6 appears.
Figure 4-18-6: RMON History Configuration Page Screenshot
The Page includes the following fields:
Object Description
 Delete Check to delete the entry. It will be deleted during the next save.
 ID Indicates the index of the entry. The range is from 1 to 65535.
 Data Source Indicates the port ID which wants to be monitored. If in stacking switch, the value
must add 1000*(switch ID-1), for example, if the port is switch 3 port 5, the value
is 2005.
 Interval Indicates the interval in seconds for sampling the history statistics data. The
range is from 1 to 3600, default value is 1800 seconds.
 Buckets Indicates the maximum data entries associated this History control entry stored in
RMON. The range is from 1 to 3600, default value is 50.
 Buckets Granted The number of data shall be saved in the RMON.
Buttons
: Click to add a new community entry.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.