Interlogix NS3702-24P-4S User Manual - Manual (Page 299)

299
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Click to refresh the Page. Note that non-committed changes will be lost.
4.12.2 Access Management
Configure access management table on this Page. The maximum entry number is 16. If the application's type match any one of the
access management entries, it will allow access to the switch. The Access Management Configuration screen in Figure 4-12-2
appears.
Figure 4-12-2: Access Management Configuration Overview Page Screenshot
The Page includes the following fields:
Object Description
 Mode Indicates the access management mode operation. Possible modes are:
Enabled : Enable access management mode operation.
Disabled : Disable access management mode operation.
 Delete Check to delete the entry. It will be deleted during the next apply .
 VLAN ID Indicates the VLAN ID for the access management entry.
 Start IP address Indicates the start IP address for the access management entry.
 End IP address Indicates the end IP address for the access management entry.
 HTTP/HTTPS Indicates the host can access the switch from HTTP/HTTPS interface that the