Interlogix NS3702-24P-4S User Manual - Manual (Page 241)

241

TCP/UDP Destination
Number
When "Specific" is selected for the TCP/UDP destination filter, you can enter a
specific TCP/UDP destination value. The allowed range is 0 to 65535. A frame
that hits this ACE matches this TCP/UDP destination value.
 TCP/UDP Destination
Range
When "Range" is selected for the TCP/UDP destination filter, you can enter a
specific TCP/UDP destination range value. The allowed range is 0 to 65535. A
frame that hits this ACE matches this TCP/UDP destination value.
 TCP FIN Specify the TCP "No more data from sender" (FIN) value for this ACE.
■ 0 : TCP frames where the FIN field is set must not be able to match this
entry.
■ 1 : TCP frames where the FIN field is set must be able to match this entry.
■ Any : Any value is allowed ("don't-care").
 TCP SYN Specify the TCP "Synchronize sequence numbers" (SYN) value for this ACE.
■ 0 : TCP frames where the SYN field is set must not be able to match this
entry.
■ 1 : TCP frames where the SYN field is set must be able to match this entry.
■ Any : Any value is allowed ("don't-care").
 TCP RST Specify the TCP "Reset the connection" (RST) value for this ACE.
■ 0 : TCP frames where the RST field is set must not be able to match this
entry.
■ 1 : TCP frames where the RST field is set must be able to match this entry.
■ Any : Any value is allowed ("don't-care").
 TCP PSH Specify the TCP "Push Function" (PSH) value for this ACE.
■ 0 : TCP frames where the PSH field is set must not be able to match this
entry.
■ 1 : TCP frames where the PSH field is set must be able to match this entry.
■ Any : Any value is allowed ("don't-care").
 TCP ACK Specify the TCP "Acknowledgment field significant" (ACK) value for this ACE.
■ 0 : TCP frames where the ACK field is set must not be able to match this
entry.
■ 1 : TCP frames where the ACK field is set must be able to match this entry.
■ Any : Any value is allowed ("don't-care").
 TCP URG Specify the TCP "Urgent Pointer field significant" (URG) value for this ACE.
■ 0 : TCP frames where the URG field is set must not be able to match this
entry.
■ 1 : TCP frames where the URG field is set must be able to match this entry.
■ Any : Any value is allowed ("don't-care").