Interlogix NS3702-24P-4S User Manual - Manual (Page 235)

235
specified (tag priority is "don't-care".)
 ARP Parameters
The ARP parameters can be configured when Frame Type "ARP" is selected.
Object Description

ARP/RARP Specify the available ARP/RARP opcode (OP) flag for this ACE.
■ Any : No ARP/RARP OP flag is specified. (OP is "don't-care".)
■ ARP : Frame must have ARP/RARP opcode set to ARP.
■ RARP : Frame must have ARP/RARP opcode set to RARP.
■ Other : Frame has unknown ARP/RARP Opcode flag.

Request/Reply Specify the available ARP/RARP opcode (OP) flag for this ACE.
■ Any : No ARP/RARP OP flag is specified. (OP is "don't-care".)
■ Request : Frame must have ARP Request or RARP Request OP flag set.
■ Reply : Frame must have ARP Reply or RARP Reply OP flag.

Sender IP Filter Specify the sender IP filter for this ACE.
■ Any : No sender IP filter is specified. (Sender IP filter is "don't-care".)
■ Host : Sender IP filter is set to Host. Specify the sender IP address in the
SIP Address field that appears.
■ Network : Sender IP filter is set to Network. Specify the sender IP address
and sender IP mask in the SIP Address and SIP Mask fields that appear.

Sender IP Address When "Host" or "Network" is selected for the sender IP filter, you can enter a
specific sender IP address in dotted decimal notation.

Sender IP Mask When "Network" is selected for the sender IP filter, you can enter a specific
sender IP mask in dotted decimal notation.
 Target IP Filter Specify the target IP filter for this specific ACE.
■ Any : No target IP filter is specified. (Target IP filter is "don't-care".)
■ Host : Target IP filter is set to Host. Specify the target IP address in the
Target IP Address field that appears.
■ Network : Target IP filter is set to Network. Specify the target IP address
and target IP mask in the Target IP Address and Target IP Mask fields that
appear.
 Target IP Address When "Host" or "Network" is selected for the target IP filter, you can enter a
specific target IP address in dotted decimal notation.