Interlogix NS3702-24P-4S User Manual - Manual (Page 170)

170
 End Address The ending IPv4/IPv6 Multicast Group Address that will be used as an address
range.
Buttons
: Click to add new address range. Specify the name and configure the addresses.
Click "Save ”.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Refreshes the displayed table starting from the input fields.
: Updates the table starting from the first entry in the IPMC Profile Address Configuration.
: Updates the table, starting with the entry after the last entry currently displayed.
4.8.4 IGMP Snooping Configuration
This Page provides IGMP Snooping related configuration. The IGMP Snooping Configuration screen in Figure 4-8-7 appears.