Interlogix NS3702-24P-4S User Manual - Manual (Page 278)

278
been disabled, but will get re-enabled when the dead-time expires. The
number of seconds left before this occurs is displayed in parentheses. This
state is only reachable when more than one server is enabled.
RADIUS Accounting Server Status Overview
Object Description
 # The RADIUS server number. Click to navigate to detailed statistics for this server.
 IP Address The IP address and UDP port number (in : notation) of
this server.
 Status The current state of the server. This field takes one of the following values:
 Disabled : The server is disabled.
 Not Ready : The server is enabled, but IP communication is not yet up and
running.
 Ready : The server is enabled, IP communication is up and running, and
the RADIUS module is ready to accept accounting attempts.
Dead (X seconds left): Accounting attempts were made to this server, but it did
not reply within the configured timeout. The server has temporarily been
disabled, but will get re-enabled when the dead-time expires. The number of
seconds left before this occurs is displayed in parentheses. This state is only
reachable when more than one server is enabled.
Buttons
Auto-refresh : Check this box to refresh the Page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the Page immediately.