Interlogix NS3702-24P-4S User Manual - Manual (Page 126)

126
database servers on the inside segment, but are not allowed to communicate with each other
For private VLANs to be applied, the switch must first be configured for standard VLAN operation When this is in place, one or more
of the configured VLANs can be configured as private VLANs. Ports in a private VLAN fall into one of these two groups:
 Promiscuous ports
— Ports from which traffic can be forwarded to all ports in the private VLAN
— Ports which can receive traffic from all ports in the private VLAN
 Isolated ports
— Ports from which traffic can only be forwarded to promiscuous ports in the private VLAN
— Ports which can receive traffic from only promiscuous ports in the private VLAN
The configuration of promiscuous and isolated ports applies to all private VLANs. When traffic comes in on a promiscuous port in a
private VLAN, the VLAN mask from the VLAN table is applied. When traffic comes in on an isolated port, the private VLAN mask is
applied in addition to the VLAN mask from the VLAN table. This reduces the ports to which forwarding can be done to just the
promiscuous ports within the private VLAN.