Interlogix NS3702-24P-4S User Manual - Manual (Page 273)

273
Figure 4-11-7: RADIUS Server Configuration Page Screenshot
The Page includes the following fields:
Global Configuration
These setting are common for all of the RADIUS Servers.
Object Description
 Timeout Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply from
a RADIUS server before retransmitting the request.
 Retransmit Retransmit is the number of times, in the range 1 to 1000, a RADIUS request is
retransmitted to a server that is not responding. If the server has not responded
after the last retransmit it is considered to be dead.
 Dead Time The Dead Time, which can be set to a number between 0 and 3600 seconds, is
the period during which the switch will not send new requests to a server that has
failed to respond to a previous request. This will stop the switch from continually
trying to contact a server that it has already determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured.