beautypg.com

5 auto-negotiation – Interlogix NS3702-24P-4S User Manual User Manual

Page 379

background image

379

The Managed Switch performs "Store and Fforward" therefore, no error packets occur. More reliably, it reduces the

re-transmission rate. No packet loss will occur.

5.5 Auto-Negotiation

The STP ports on the Switch have built-in "Auto-negotiation". This technology automatically sets the best possible bandwidth

when a connection is established with another network device (usually at Power On or Reset). This is done by detect the modes and

speeds at the second of both device is connected and capable of, both 10Base-T and 100Base-TX devices can connect with the

port in either Half- or Full-Duplex mode. 1000Base-T can be only connected in Full-duplex mode.