4 users configuration – Interlogix NS3702-24P-4S User Manual User Manual
Page 47

47
Figure 4-2-3:
IP Status Page Screenshot
The Page includes the following fields:
Object
Description
Interface
The name of the interface.
Type
The address type of the entry. This may be LINK or IPv4.
Address
The current address of the interface (of the given type).
IP Interfaces
Status
The status flags of the interface (and/or address).
Network
The destination IP network or host address of this route.
Gateway
The gateway address of this route.
IP Routes
Status
The status flags of the route.
IP Address
The IP address of the entry.
Neighbor Cache
Link Address
The Link (MAC) address for which a binding to the IP address given exist.
Buttons
Auto-refresh
: Check this box to refresh the Page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the Page.
4.2.4 Users Configuration
This Page provides an overview of the current users. Currently the only way to login as another user on the web server is to close
and reopen the browser. After setup is completed, press “Apply” button to take effect. Please login web interface with new user
name and password, the screen in
Figure 4-2-4
appears.
Figure 4-2-4:
Users Configuration Page Screenshot
The Page includes the following fields:
Object
Description
User Name
The name identifying the user. This is also a link to Add/Edit User.
Privilege Level
The privilege level of the user.
The allowed range is 1 to 15. If the privilege level value is 15, it can access all
groups, i.e. that is granted the fully control of the device. But others value need to