Interlogix NS3702-24P-4S User Manual - Manual (Page 320)

320
Figure 4-13-4: Dynamic IP Source Guard Table Screenshot
Navigating the ARP Inspection Table
Each Page shows up to 99 entries from the Dynamic IP Source Guard table, default being 20, selected through the "entries per
Page " input field. When first visited, the web Page will show the first 20 entries from the beginning of the Dynamic IP Source Guard
Table.
The "Start from port address", "VLAN", "IP address" and "IP mask" input fields allow the user to select the starting point in the
Dynamic IP Source Guard Table. Clicking the “Refresh” button will update the displayed table starting from that or the closest next
Dynamic IP Source Guard Table match. In addition, the two input fields will - upon a “Refresh” button click - assume the value of the
first displayed entry, allowing for continuous refresh with the same start address.
The “ >> ” will use the last entry of the currently displayed as a basis for the next lookup. When the end is reached the text "No more
entries" is shown in the displayed table. Use the “ |<< ” button to start over. The Page includes the following fields:
Object Description

Port
The port number for which the status applies. Click the port number to see the
status for this particular port.

VLAN ID The VLAN ID of the entry.

IP Address The IP address of the entry.

MAC Address The MAC address of the entry.