ClearOne comm CONVERGE SR 1212 - Manual (Page 86)

81
AEC (ACOuSTIC ECHO CANCELLATION)
AEC (Acoustic Echo Cancellation) reduces or removes acoustical echo from an input signal, thereby improving
audio clarity. Converge pro devices perform aeC using the full bandwidth (20hz to 22khz) of the signal.
.
aeC uses a reference source to perform aeC based on the acoustic characteristics and dynamics of a specific
room. use the aeC reference/pa adapt reference tab to set up these references.
Accessing AEC
With the Channel tab selected on the Tab Bar, select the desired mic Input channel on the Tree View tab in the
Site Pane, and press the AEC button (located just below the pre gain meter).
the Channel Property Configuration screen appears with the AEC tab selected (see below).