ClearOne comm CONVERGE SR 1212 - Manual (Page 268)

263
PRGSTRING – Program String
this command sets/reports a programmed string.
COMMAND FORM : DEVICE PRGSTRING [value]
Argument Type Size Values units
ID unsigned Integer 4 0 – 7
value string 80 Clear = Clear current value
1 – 80 Chars
(null to query in text)
special Characters:
\a = alert
\b = backspace
\f = form feed
\n = new line
\r = carriage return
\t = horizontal tab
\v = vertical tab
\\ = backslash
PTTTHRESHOLd – Push to Talk Threshold
this command selects/reports the setting of the push to talk threshold for a microphone.
Command Form : DEVICE PTTTHRESHOLd [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 3 (m)
value Float 2 -100 to 0
(null to query in text) dB
PuSHTOTALk – Push to Talk
this command selects/reports the setting of push-to-talk for a microphone.
Command Form : DEVICE PuSHTOTALk [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 3 (m)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
RAmP – Ramp Gain Adjustment
this command starts / stops the gain ramp for an input, output or assignable processing block. There is no
query associated with this command.
Command Form : DEVICE RAmP [target]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 1, 2, 3, 5, 7, 12, 16, 17 (I, J, o, m, p, l, F, t, r)
rate signed Integer 1 -50 – 50
If value=0, the ramp will stop.
If value< 0, the gain will ramp down.
If value>0, the gain will ramp up. dB / s
target signed Integer 1 -65 – 20
If null in text or 0x80 in binary, the ramp will use
the channel’s maximum and minimum for a target. dB