ClearOne comm CONVERGE SR 1212 - Manual (Page 42)

37
press the 2. Select button
select the desired value using the 3. menu dial
press the 4. Select button to set the selected value
press the 5. Esc button to return to the Channels menu
NOTE: When mute is set to on for a mic input channel, the microphone-on leD for that channel
illuminates red on the front panel.
For more information, see the Table of Contents for these related topics:
LCd Programming Overview •
LCd Channels menu •
LCd Settings menu •
LCd macros menu •
LCd Presets menu •
Controls and Connections •
mic Input Settings •
Line Input Settings •
Output Settings •
Process Settings •
Fader Settings •
Telco Tx Settings •
Telco Rx Settings •
Pwr Amp •
LCd SETTINGS mENu
the LCd Settings menu allows you to configure serial port settings and Device IDs, view network Ip settings,
change the lCD contrast level, and restore factory default settings for a unit.
Accessing the Settings menu
to access the Settings menu, press the Select button on the front panel, use the menu dial to select Settings,
and press the Select button.
the Settings menu appears as shown below:
SETTINGS PAGE 1/2
RS232 Network
Default DID
settings menu options include:
RS-232 •
Network •
dId •
default •
Contrast •