ClearOne comm CONVERGE SR 1212 - Manual (Page 253)

248
LOCSTATE – Location: State
this command sets/reports the location of the unit: state/prefecture string.
Command Form : DEVICE LOCSTATE [value]
Argument Type Size Values units
value string 80 Clear = Clear current value
1 – 63 Characters
(null to query in text)
LOGmASk – Device Log Mask
this command sets or reports the device event log mask.
Command Form : DEVICE LOGmASk [value]
Argument Type Size Values units
value hexadecimal 4 xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx
|||| |||| |||| |||| |||| |||| |||| ||||> reset
|||| |||| |||| |||| |||| |||| |||| |||> errors
|||| |||| |||| |||| |||| |||| |||| ||> password access
|||| |||| |||| |||| |||| |||| |||| |> telco on/off
|||| |||| |||| |||| |||| |||| ||||> Dial
|||| |||| |||| |||| |||| |||| |||> Call Duration
|||| |||| |||| |||| |||| |||| ||> system Checks
|||| |||| |||| |||| |||| |||| |> Firmware Download
|||| |||| |||| |||| |||| ||||> (reserved)
|||| |||| |||| |||| |||| |||> Default
|||| |||| |||| |||| |||| ||> (reserved)
|||| |||| |||| |||| |||| |> (reserved)
|||| |||| |||| |||| ||||> safety mute
|||| |||| |||| |||| |||> macro execution
|||| |||| |||| |||| ||> preset execution
|||| |||| |||| |||| |> audio Clipping
|||| |||| |||| ||||-> microphone gains
|||| |||| |||| |||-> processor gains
|||| |||| |||| ||-> Fader gains
|||| |||| |||| |-> telco gains
|||| |||| ||||-> power amp. gains
|||| |||| |||-> power amp. errors
|||| |||| ||-> Caller ID
|||| |||| |-> sIp message log
|-------|-> (reserved)
(null to query in text)
LVL – Level
this command reports the level of a channel. This command is read only.
Command Form : DEVICE LVL [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 1, 2, 3, 5, 7, 12, 16, 17, 20
(I, J, o, m, p, l, F, t, r)
position meter type 2 see meter Type definitions
value signed Float 4 -99.99 – 99.99
(sent with null in text, value returned) dB