ClearOne comm CONVERGE SR 1212 User Manual
Page 48
43
select the
18.
Install the software automatically radio button in the second screen of the wizard (shown
below), then click Next to proceed with installation.
When the Windows unsigned driver warning dialog appears, click
19.
Continue Anyway (Windows xp) or
Install this driver software anyway (Windows vista) to install the drivers.
When the usB driver installation is complete, click
20.
Finish to close the wizard.
If you will be using Ip to run Console, connect ethernet cables between your lan and Converge/Converge
21.
pro device(s).
the Console software and your Converge/Converge device(s) are now ready for use. If you experience any
problems during installation, contact Clearone technical support.
This manual is related to the following products: