ClearOne comm CONVERGE SR 1212 - Manual (Page 72)

67
Processing Channel Settings
pointing to a processing channel in the matrix section of the screen highlights it in orange, and shows the routing for
the channel in white (shown above). Clicking the channel selects it and displays the routing to other units in the site
by channel type in the site pane (shown below).
set the desired gain settings for the processing channel using the Gain Arrows to the right of the Gain display.
toggle del (delay), Comp (Compression), and mute on and off by clicking the associated LEd Buttons.
to access the full set of configuration settings for the channel, click on the magnifying Glass icon located next to
the channel.