ClearOne comm CONVERGE SR 1212 - Manual (Page 36)

31
dEVICE IdS
Device IDs provide unique identifiers for all Converge/Converge pro units that are linked together. after making
e-bus connections between units, you must set a unique Device ID number for all units of the same Device type in
the network.
device Types and Ids
Device types and Device IDs by model are as follows:
model Device type Device ID range
880 1 0-B
th20 2 0-F
840t 3 0-B
8i a 0-B
880t D 0-B
880ta h 0-B
sr 1212 g 0-B
sr 1212a I 0-B
NOTE : all models ship from the factory with a default DID of 0.
Assigning device Ids
use the following procedure to assign device IDs using the front panel controls:
press the 1. Select button on the front panel. the Converge menu appears.
CONVERGE MENU
Channels Settings
Presets Macros
use the 2. menu dial to highlight the Settings menu. press the Select button. the Settings menu appears.
SETTINGS PAGE 1/2
RS232 Network
Default DID
use the 3. menu dial to highlight dId. press the Select button. the device Id menu appears.