ClearOne comm CONVERGE SR 1212 - Manual (Page 79)

74
Enable Noise Gate 1. : enables or Disables the feature.
mode » :
Adaptive • : actively monitors the noise floor of the environment and determines when to enable
gating.
manual • : user sets threshold.
Timer » : time before the amp begins gating.
NOTE: the noise Floor must be at the threshold level for the duration set in the Timer in order
to enable the noise gate.
Filter » :
None • : no filtering is applied to noise.
High Pass • : a high pass filter is applied to noise before threshold reading.
Low Pass • : a low pass filter is applied to suppress noise before threshold reading.
High/Low Pass • : high and low pass filtering is applied to noise before threshold reading.
Compressor • : allows the user to enable compression on an amp channel based on configurable parameters.
With a few exceptions (noted below) this feature operates identically to the Processing Compressors.
delay mode » : enabling Delay mode sets a timed delay after which the Compressor activates. timing