ClearOne comm CONVERGE SR 1212 - Manual (Page 204)

199
using device Log
In the device Log window, select the events you want to log using the Event Selection check boxes.
events available for logging include:
Reset • : reports unit reset events
Errors • : reports internal unit errors
Access: • reports all web, telnet, front panel, and usB access events
System Checks • : reports the pass/fail status of system Checks
Firmware download • : reports firmware downloads
default • : reports unit default events
Safety mute • : reports safety mute events
macro • : reports macro execution events
Preset • : reports when presets are run
Audio Clipping • : reports audio clipping events
Telco On/Off • : reports when the telco line goes on or off hook
dial • : reports dial command events including DtmF, phonebook, speed Dial, and redial
Call duration • : reports the time between on and off hook events for all calls
microphone Gains • : reports microphone gain levels
Processor Gains • : reports processor gain levels
Fader Gains • : reports fader gain levels
Telco Gains • : reports telco gain levels
Power Amp • . gains: reports power amp gain levels
Caller Id • : shows Caller ID report
Power Amp. Errors • : reports power amp errors
NOTE: all device events and event scheduler events are logged automatically.
use the Refresh, Clear, Save, and Print buttons to refresh the log display, clear the log, save the log to a text file,
and print the log.