ClearOne comm CONVERGE SR 1212 - Manual (Page 249)

244
GATE – Gate Status
this command reports the gate status of mics. This command is read only.
Command Form : DEVICE GATE [value]
Argument Type Size Values units
value hexadecimal 4 Bits 0 – 7 represent gate status on mics 1 – 8
(null sent in text, value returned)
GHOLd – Gate Hold Time Adjust
this command selects/reports the setting of hold time.
Command Form : DEVICE GHOLd [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 3 (m)
value unsigned Float 2 0.10 – 8.00
(null to query in text) s
GmOdE – Gating Mode
this command selects/reports the setting of gating mode.
Command Form : DEVICE GmOdE [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 3 (m)
value unsigned Integer 2 1 = auto
2 = manual on
3 = manual off
(null to query in text)
GOVER – Gating Override
this command selects/reports the setting of gating override.
Command Form : DEVICE GOVER [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 3 (m)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
GPIOSTATuS – General Purpose Status
this command sets the state of a general purpose status pin.
Command Form : DEVICE GPIOSTATuS pin port [value]
Argument Type Size Values units
pin unsigned
Integer 1 1 – 24 (only user definable status pins.
port unsigned
Integer 1 1 – 2
value unsigned
Integer 2 0 = high
1 = low
2 = toggle
(null to query in text)