ClearOne comm CONVERGE SR 1212 - Manual (Page 248)

243
FILTSEL – Filter Select
this command turns on and off the filters.
Command Form : DEVICE FILTSEL [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 3, 5 (m, p)
node unsigned Integer 1 group 3 1 – 4
0xFF for all (*
text)
group 5 1 – 15
0xFF for all (*
text)
value unsigned Integer 1 0 = off
1 = on
2 = toggle
(null to query in text)
FLOw – Flow Control
this command selects/reports the flow control of the serial port on the unit. hardware flow control is implemented
using Dtr and Dsr.
Command Form : DEVICE FLOw [value]
Argument Type Size Values units
value unsigned Integer 4 0 = off
1 = on
2 = toggle
(null to query in text)
FmP – First Mic Priority Mode
this command selects/reports first mic priority mode.
Command Form : DEVICE FmP [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 4 (g)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
GAIN – Gain Adjustment
this command changes or reports back the gain for a channel.
Command Form : DEVICE GAIN [value] [absol/rel]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 1, 2, 3, 5, 7, 12, 16, 17 (I, J, o, m, p, l, F, t, r)
value signed
Float 2 -99.90 – 99.90 **
(null to query in text) dB
absol / rel 0 a = absolute
r = relative
null = relative
NOTE: values indicate valid range for entry values only. actual internal range of the gain stage is
from –65 to 20. absolute values will be limited to the internal gain range.