ClearOne comm CONVERGE SR 1212 - Manual (Page 262)

257
PAEqEN – PA EQ Filter Enable
this command enables the eq filter on a pa Channel
Command Form : DEVICE PAEqEN [value]
Argument Type Size Values units
Channel Channel 1 see groups and Channels
group group 1 23 (J)
value unsigned
short 2 0 = off
1 = on
2 = toggle
(null to query in text)
PAEqRST – PA EQ Filter Reset
this command resets the eq level for all bands in the filter bank. There is no query associated with this
command.
Command Form : DEVICE PAEqEN [value]
Argument Type Size Values units
Channel Channel 1 see groups and Channels
group group 1 23 (J)
reserved Zero 2 Zero
PAEqSET – PA EQ Filter Set
this command sets/reports the eq level for a given band in the filter bank
Command Form : DEVICE PAEqEN [value]
Argument Type Size Values units
Channel Channel 1 see groups and Channels
group group 1 23 (J)
Band unsigned
short 2 1 = 32.25 hz
2 = 62.5 hz
3 = 125.0 hz
4 = 250.0 hz
5 = 500.0 hz
6 = 1000.0 hz
7 = 2000.0 hz
8 = 4000.0 hz
9 = 8000.0 hz
10 = 16000.0 hz hz
value signed
Float 4 -12.00 – 12.00
(null to query in text) dB