ClearOne comm CONVERGE SR 1212 - Manual (Page 256)

251
mCmINmAx – Multi-Channel Min and max Gain Setting
this command changes or reports back the minimum and maximum gain setting for a channel
Command Form : DEVICE mCmINmAx [value] [min max]
Argument Type Size Values units
Channel Channel 1 see groupandChannels
group group 1 128 (no text group)
multi-
Channel
group group 2 only 23 (J) accepted for now.
see groupandChannels
value signed short 2 -65.00 – 20.00
(null to query in text) dB
max signed short 2 -65.00 – 20.00 dB
mCmuTE – Multi-Channel Min and Max Gain Setting
this command performs/reports audio mutes of the grouped channels.
Command Form : DEVICE mCmuTE [value]
Argument Type Size Values units
Channel Channel 1 1 – n (max number of channels in multi-Channel
group divided by 2)
group group 1 128 (no text group)
multi-
Channel
group group 1 only 23 (J) accepted for now.
see groupandChannels
value unsigned Char 1 0 = off
1 = on
2 = toggle
(null to query in text)
mCRAmP – Multi-Channel Ramp
this command performs audio gain ramps of the grouped channels. There is no query associated with this
command.
Command Form : DEVICE mCRAmP
Argument Type Size Values units
Channel Channel 1 1 – n (max number of channels in multi-Channel
group divided by 2)
group group 1 128 (no text group)
multi-
Channel
group group 2 only 23 (J) accepted for now.
see groupandChannels
rate signed Integer 2 -50 – 50
If value = 0, the ramp will stop.
If value < 0, the gain will ramp down.
If value > 0, the gain will ramp up. dB /
sec
target signed Integer 2 -65 – 20
If null in text or 0x80 in binary, the ramp will use the
channel’s maximum and minimum for a target. dB