ClearOne comm CONVERGE SR 1212 - Manual (Page 260)

255
NCSEL – Noise Cancellation Select
this command selects/reports the setting of the noise Cancellation for each microphone channel.
Command Form : DEVICE NCSEL [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 3, 17 (m, r)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
NLP – Non Linear Processing Adjust
this command selects/reports the setting of non-linear processing for each microphone channel.
Command Form : DEVICE NLP [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 3 (m)
value unsigned Integer 2 0 = off
1 = soft
2 = medium
3 = aggressive
(null to query in text)
NOm – Number of Open Microphones Mode
this command selects/reports the setting of number of open microphones (nom) on output channels.
Command Form : DEVICE NOm [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 2, 16 (J, o, t)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
NTPSRV – NTP Network Time Server Address
this command selects/reports the Ip addresses of the ntp time server the unit’s ntp client requests time status
from.
Command Form : DEVICE NTPSRV [value 1 value 2]
Argument Type Size Values units
value 1 Ip address 4 (null to query in text)
value 2 Ip address 4
NuLL – Null the Telephone Line
this command nulls the telephone line. There is no query for this command.
Command Form : DEVICE NuLL
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)