ClearOne comm CONVERGE SR 1212 - Manual (Page 259)

254
mTRxLVL – Matrix Attenuation Adjust
this command selects/reports the matrix level at the cross point.
Command Form :
DEVICE mTRxLVL [value] [a/r]
Argument Type Size Values units
source Channel Channel 1 see Groups and Channels
source group group 1 1, 3, 5, 6, 7, 12, 17
(I, m, p, e, l, F, r)
Destination Channel Channel 1 see Groups and Channels
Destination group group 1 2, 5, 6, 12, 16,
(h, J, o, p, e, F, t,)
value signed Float 4 -99.00 – 99.00 **
(null to query in text) dB
absol / rel 0 a = absolute
r = relative
null = relative
NOTE: values indicate entry range only. actual internal range of the matrix attenuation is from –60
to +12dB, and absolute values are limited to the internal gain range.
muTE – Mute
this command selects/reports the setting of mute on a channel.
Command Form : DEVICE muTE [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 1, 2, 3, 5, 7, 12, 16, 17 (I, J, o, m, p, l, F, t, r)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
NAmE – Unit Name (NETBIOS Name)
this command sets/reports the name of the unit which is also used for its netBIos name.
Command Form : DEVICE NAmE [value]
Argument Type Size Values units
value string 16 1 – 15 Characters
(null to query in text)
NCd – Noise Cancellation Depth Adjust
this command selects/reports the depth setting of the noise Cancellation.
Command Form : DEVICE NCd [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 3, 17 (m, r)
value unsigned Integer 2 6 – 15
(null to query in text) dB