ClearOne comm CONVERGE SR 1212 User Manual

Page 78

Number of Fixed Filters

: up to 16 Fixed Filters are applied. If the specified

number of filters are not required, they become Dynamic Filters.

Filter Bandwidth

: Bandwidth is determined by the specified q factor. a lower q creates a

filter that works across a wider frequency range. a higher q utilizes a narrower range.

Filter depth mode

locked re-uses filters. a replacement filter, with new settings and increased filter depth is

•

applied in place of an existing filter.

unlocked adds a new filter at a specific frequency. no filters are replaced, so this setting

•

will count against the total number of filters available.

mode Settings

: voice and music presets are available to fine-tune the feedback eliminator.

NOTE: voice mode is the more aggressive setting.

Enable Ringing Elimination

: allows the Feedback Cancellation to attempt to suppress

ringing.

NOTE: this setting adjusts slowly to eliminate ringing.

Click Close to close the window once the setup Complete indicator has switched from yellow (in

process) to green (setup complete).

Noise Gate:

•

this feature reduces buzz and hum from the amp when the system is on but not in use.

This manual is related to the following products: