ClearOne comm CONVERGE SR 1212 - Manual (Page 254)

249
LVLREPORT – Level Report
this command selects/reports the status of level reporting for the specified channel.
Command Form : DEVICE LVLREPORT [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 1, 2, 3, 5, 7, 12, 16, 17
(I, J, o, m, p, l, F, t, r)
position meter type 2 see meter Type definitions
value unsigned Integer 4 0 = off (Delete from list being reported)
1 = on (add to list being reported)
2 = toggle
(null to query in text)
LVLREPORTEN – Level Report Enable
enables level reporting for the unit.
Command Form : DEVICE LVLREPORTEN [value]
Argument Type Size Values units
value unsigned Integer 4 0 = turn off reporting but leave current list
1 = turn on reporting
2 = turn off reporting and clear the list
(null to query in text)
mACRO – Macro Execution/Reporting
this command executes a specified macro or reports the last macro executed.
Command Form : DEVICE mACRO [value]
Argument Type Size Values units
value Channel 4 see 14 (C) in Groups and Channels
(null to query last macro ran in text)
NOTE: the response will indicate successful execution of the macro, but it does not guarantee
that each command in the macro was executed.
mANuFACTuRER – Manufacturer Identification Label
this command selects/reports the model identification label of the specified channel.
Command Form : DEVICE mANuFACTuRER [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 1, 2, 3, 7
(I, o, m, l)
reserved unsigned
Integer 2 0
label string 16 1-16 characters
Clear = clear the label
(null to query in text) dB