ClearOne comm CONVERGE SR 1212 - Manual (Page 138)

133
NOTE: your changes are automatically saved when you close the slider.
Expanded Channel Routing matrix
In the channel routing matrix, pressing the button above or below the cross point box for a channel displays the
signal flow diagram and configuration controls for that channel as shown below.
this display is identical to that shown in Channel when the channel is selected in the tree view pane.
you can change the label (name) of the channel in the label entry box. you can also change channel configuration
settings. For example, for an output channel you can toggle the nom button to turn constant gain mode on or off,
toggle the mute button, and use the gain slider to set the gain level for the channel.
NOTE: Changes to configuration settings made in the channel routing matrix apply globally to
that channel. For example, changing the label (name) from “Input 1” to “Podium mic”
changes the name of the channel in the tree view pane, and everywhere else the label
appears in Console.