ClearOne comm CONVERGE SR 1212 - Manual (Page 30)

25
LEd Bar meter G. : Displays the audio level of a selected input, output, processing, or fader channel. Default
meters: 880-output 12, 880t-output 12 , 840t-output 8, 8i-mic 1, th20-telco tx, sr1212-output 12.
AmP Fault Indicator • LEds(880ta, sr 1212a): Indicates amplifier faults:
1-4 indicates clip »
5 indicates thermal overload »
6 indicates fault »
7 indicates fan on/off »
Amplifier On/Off Switch H. (880ta, sr 1212a): turns power to the amplifiers on or off.
NOTE (880ta, sr 1212a): this does not disconnect power from the aC mains. to disconnect unit
power from the mains, disconnect the unit’s power cord from the mains socket. to reconnect power, plug
the unit’s power cord into the mains socket following all safety instructions and guidelines.
Telco On/Off Button & LEds I. : the button connects/disconnects the telephone line attached to the device
and the leDs indicate the connection status of the attached telephone line (840t, th20, 880t, 880ta).