ClearOne comm CONVERGE SR 1212 - Manual (Page 105)

100
Channel Routing matrix: Inputs
the channel routing matrix section of the Channel screen shows the matrix row and audio routing configuration for
the selected input channel (mic input 1 in this case). Clicking a cross point box selects it, clicking it a second time
sets the cross point, as indicated by a colored box. the dB level for set cross points is shown numerically in the box.
to adjust cross point gain/attenuation, right-click on a cross point box and select Cross Point from the shortcut
menu.
the Cross Point Attenuation slider appears. move the slider or use the selector box to set the gain/attenuation
level in dB. the range is from -60 to 12dB in .5dB increments. the default is 0dB. note that the level to the nearest
dB is displayed in the cross point for the channel on the matrix.
NOTE: your changes are automatically saved when you close the slider.
Expanded Channel Routing matrix
In the channel routing matrix, pressing the button underneath an Output, Process, or Fader cross point box
displays the signal flow diagram and configuration controls for that channel. For example, clicking on Output 5
displays the routing configuration for output channel 5 as shown below.