ClearOne comm CONVERGE SR 1212 - Manual (Page 246)

241
Argument Type Size Values units
Channel Channel 1 see groupandChannels
group group 1 23 (J)
value unsigned Float 2 0 = locked
1 = unlocked
Default 0
(null to query in text)
FEm – Feedback Elimination Mode
this command set the feedback mode to either music or voice. this effects how aggressive the reduction is.
Command Form : DEVICE FEm [value]
Argument Type Size Values units
Channel Channel 1 see groupandChannels
group group 1 23 (J)
value unsigned Float 2 0 = locked
1 = unlocked
Default 0
(null to query in text)
FEN – Feedback Elimination Nodes
this command reports the total number of filter nodes (fixed and dynamic) currently being used for the feedback
cancellation. This is a query only command.
Command Form : DEVICE FEN [value]
Argument Type Size Values units
Channel Channel 1 see groupandChannels
group group 1 23 (J)
value unsigned short 2 total nodes
(alWays null In text)
FER – Feedback Elimination Node Reset
this command resets both the fixed and dynamic filters on the feedback eliminator. There is no query associated
with this command.
Command Form : DEVICE FER [value]
Argument Type Size Values units
Channel Channel 1 see groupandChannels
group group 1 23 (J)
value unsigned short 2 Zero
FERNG – Feedback Elimination Ring Elimination Mode
this command enables/disables the ring elimination mode on the feedback eliminator.
Command Form : DEVICE FERNG [value]
Argument Type Size Values units
Channel Channel 1 see groupandChannels
group group 1 23 (J)
reserved Zero 2 0 = 0ff
1 = on
2 = toggle
(null to query in text)