ClearOne comm CONVERGE SR 1212 - Manual (Page 296)

291
CONVERGE PRO 880T (continued)
Ethernet
autoswitching with quality of Connection (qoC) •
10/100 mbps ethernet network port •
10/100 mbps ethernet pC port •
rJ-45 Connectors •
RS-232
serial Command protocol only (Console software not •
supported on rs- 232 port)
DB-9 female
•
9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits, •
1 stop bit, no parity
hardware flow control on (default)/off
•
uSB
version 2.0 compatible •
type: B-connector •
Control/Status Ports
DB-25 female a/B (2) •
Inputs a/B: active low (pull to ground) •
outputs a/B: open collector, 40 vDC max, 40 ma each •
+3.3 vDC pins (2) (300 ma over-current protected) •
Configuration & Administration Software
Converge™ Console •
Power Input Range
auto-adjusting •
100–240 vaC; 50/60 hz •
Power Consumption
30 W typical •
dimensions (L x d x H)
17.25” x 10.25” x 1.75” •
43.8 x 26 x 4.5 cm •
weight
7.5 lbs/3.3375 kg unit weight •
12 lbs/5.4kg shipping weight •
Operating Temperature
14° F/-10° C to 122° F/50° C ambient unit temperature •
Approvals
see • Appendix D: Compliance
aes48-2005: aes standard on interconnections •
—grounding and emC practices — shields of
connectors in audio equipment containing active
circuitry (self certified)
Part Number
910-151-881 Converge pro 880t
8-Channel aeC microphone mixer with telephone hybrid and
10W amplifier