ClearOne comm CONVERGE SR 1212 User Manual
Page 66
61
this prevents audio from being received from units above the master unit in a site. For example, you can configure
a site with multiple units for a room-combining application where all units act together when three smaller rooms are
combined into a larger room. When the rooms are divided again, the audio from one room will not be available in
the other two rooms due to the audio master configuration.
In graphic above, the third unit in the network is an audio master with an rs-232 control device attached. audio
from the first and second units in the network does not pass beyond the second unit. likewise the second audio
master unit in the network does not pass audio from the unit before it. sites can use multiple rs-232 devices, which
you can connect to any unit regardless of Control slave or master designations.
serial control is not affected by audio master or slave designations. global serial control of the site is maintained by
the unit connected to a control device through its rs-232 port, in this case the third unit in the stack, which is also
designated as the first audio master in the network.
NOTE: a master unit is not required for Converge/Converge pro sites, and in most installations,
all units will be slaves. also, snmp Control is not affected by audio master designations.
For information about the link In and link out connections used to build sites, see Controls & Connections.
Room
enter a descriptive name for the room in the Room field.
Default Meter & Channel
select an input, output, or processing channel to be the default meter on the front panel leD meter when a
channel is not specifically selected.
Front Panel Mode & PIN (Front Panel Lock/Unlock)
select Lock in the Front Panel mode field to lock the front panel lCD of the unit and require a pIn code to unlock
it. enter the unlock code in the Front Panel Pin field. select unlock in the Front Panel mode field to leave the
front panel lCD unlocked.
Telephone Country Code
select the appropriate telephone Country Code for your installation (880ta, 880t, 840t, th20 models only).