ClearOne comm CONVERGE SR 1212 - Manual (Page 120)

115
the Cross Point Attenuation slider appears. move the slider or use the selector box to set the gain/attenuation
level in dB. the range is from -60 to 12dB in .5dB increments. the default is 0dB.
NOTE: your changes are automatically saved when you close the slider.
In the channel routing matrix, pressing the button underneath an Output, Process, or Fader cross point box
displays the signal flow diagram and configuration controls for that output channel as shown below.
this display is identical to that shown in Channel when the output channel is selected in the Tree View pane. see
Output Settings for more information.
you can change the label (name) of the output channel in the Output entry box, toggle the NOm button to turn
constant gain mode on or off, toggle the mute button to mute or un-mute the channel, and use the Gain slider to
set the gain level for the channel. the Output Level meter shows the level for the channel in real time.
NOTE: Changes to configuration settings made in the channel routing matrix apply globally to
the output, processing, or fader channel. For example, changing the label (name) from
“Output 1” to “Ceiling Speakers” changes the name of the channel in the tree view
pane, and everywhere else the label appears in Console.
Creating Channel Objects
one of the most powerful features of Console is the ability to create Channel objects. Channel objects capture
all settings for the channel at the time the object is created. after configuring an input using the Channel tab as
described in this topic, you can save it into the Database, and use drag and drop configuration to streamline
configuration tasks.
to save a telco rx channel configuration, right click in the Channel screen (anywhere above the channel routing
matrix). From the shortcut menu that appears, select Export Object as shown below.