ClearOne comm CONVERGE SR 1212 - Manual (Page 210)

205
For some commands, such as mACRO, the Status section of the command editor becomes active. Status
controls the leD status indicator for the associated button based on the state conditions entered in the Active
State (leD on) and Inactive State (leD off) rows of the Status section.
pressing a programmed button in the Web portal executes the command selected in the press row of the Command
section. releasing a button executes the command selected in the release row (if applicable for the programmed
command).
Configuring Control Console
Control Console provides eight fader groups (mixers) with gain sliders, mute buttons, and level meters. It also
provides four user-programmable buttons. the fader groups can control multiple units in a site.
select the fader group or user key you want to program from the drop-down list in the upper left hand corner of the
screen. For fader groups, you will also need to select Gain, mute, or meter from the second drop-down list.
NOTE: you can also select an element to program, such as a gain slider or user button, by
selecting its graphical representation in the Control Console window. For example, in the
screen shot above, the meter element for Fader group 1 is selected. the lvlreport
command associated with the meter will display real-time level of fader group on the
Converge pro 840t unit (DID 0).