Pilz PSENvip RL D P - Manual (Page 83)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-1
7.1 Commissioning guidelines
7 Commissioning
77000 Commissioning Commissioning 7- 7.1 Commissioning guidelines 7100 Commissioning guidelines 7- Inbetriebnahme_Hinweise
When commissioning for the first time, please note the following:
Initial commissioning involves
 Aligning the transmitter and receiver
 Tracking the adjustment line to the tip of the upper tool
 Entering the overrun
 Performing the function test using the test piece
The tool change adjustment involves
 Tracking the adjustment line to the tip of the upper tool
 Performing the function test using the test piece
CAUTION!
Have the protective equipment tested and approved before
commissioning for the first time!
Any machine safeguarded by the PSENvip must be tested and
approved by qualified personnel before it is placed on the mar-
ket. A test report must be generated and archived during initial
commissioning.
Please refer to the guidelines given in the chapter entitled
"Safety", under "Qualified Personnel".
NOTICE
The tool change adjustment must also be made during initial
commissioning.