Pilz PSENvip RL D P - Manual (Page 19)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-3
3.1 Intended use
3 Safety
3.1.2.3 Hazards arising from incorrect handling of the workpiece
Hazards arising from incorrect handling of the workpiece 3- Sicherheit_Betrieb_Handhabung_Werkstueck_falsch
The PSENvip does not protect against hazards arising from incorrect
handling of the workpiece.
When bending metal sheets on press brakes there is a risk of hand inju-
ries
 From the tool's closing movement
 From the swivel movement of the parts of the metal sheet that pro-
trude from the tool and
 From the dropping of the metal sheet when the tool is opened.
So please note the following:
 You can avoid crushing and trapping of fingers or hands if the work-
piece is handled correctly.
 Wear protective gloves to prevent cuts from edges, corners and ridg-
es.
3.1.2.4 Correct handling of the workpiece
Correct handling of the workpiece 3- Sicherheit_Warnung_Quetschen_1
WARNING!
Crushing and trapping of fingers or hands!
With box bending and/or back gauge bending mode, the pro-
tected field is partly blanked.
Around the bending line there is an increased risk of crushing
and trapping of fingers or hands.