Pilz PSENvip RL D P - Manual (Page 25)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-9
3.2 Standards
3 Safety
3.2 Standards 3200 Standards 3- Sicherheit_Normen
To use the PSENvip correctly you will need to have a good knowledge
of the relevant standards and directives. The following gives an overview
of the most important standards:
 EN 61496-1:2004: Safety of machinery - Electrosensitive protective
equipment, Part 1
 CLC/TS 61496-2:2006: Safety of machinery - Electrosensitive protec-
tive equipment, Part 2
 EN 12622:2009: Machine tools - Hydraulic press brakes
 EN ISO 13849-1:2008: Safety of machinery – Safety-related parts of
control systems - Part 1: General principles for design
 EN ISO 13849-2:2008: Safety of machinery – Safety-related parts of
control systems - Part 2: Validation
 EN 61508:2001: Functional safety of safety-related electrical/elec-
tronic/programmable electronic systems
Please note this is not an exhaustive list of safety standards and direc-
tives.