beautypg.com

Spo2 numeric view – Welch Allyn Connex Integrated Wall System - User Manual User Manual

Page 94

background image

The frame provides a numeric view and a waveform view of SpO2 data. You can toggle between

views by touching the left side of the frame.

SpO2 numeric view

The numeric view indicates the SpO2 saturation percentage and the pulse amplitude. Features of

this view differ based on the type of sensor enabled and the profile selected.

Nellcor sensor

Monitor profile

Spot Check and Triage profiles

Masimo sensor

Monitor profile

Spot Check and Triage profiles

Pulse amplitude

The pulse amplitude bar indicates the pulse beat and shows the relative pulse strength. More bars

illuminate as the detected pulse gets stronger.

Response Mode Control

The Response Mode Control allows you to set the SpO2 measurement time to either Normal or

Fast.

Perfusion index

Perfusion Index (PI) is an SpO2 feature available only with Masimo-equipped monitors.

88 Patient monitoring

Welch Allyn Connex

®

Integrated Wall System