Welch Allyn Connex Integrated Wall System - User Manual - Manual (Page 66)

• Constant amber for low priority alarms
Home tab
Home tab notifications
Notification Description
Device Status area The area changes color and displays a message with an accompanying status
icon or button. If the alarm tone is in a pause interval, a timer countdown appears.
If multiple alarms and information messages are active, the Device Status area
shows the highest priority alarm. If the alarms are equal in priority, the most
recent alarm message appears. You can cycle through the messages for each
active alarm.
Parameter frame The background color changes. Touch this area to pause or turn off an alarm
audio tone. Visual indicators and Nurse Call notification will persist during an
audio paused condition.
Alarm Limit control The icon in this control indicates the status of the alarm limit settings. Red and
amber icons indicate measurements that have exceeded alarm limits.
Touch this control to navigate to a parameter-specific tab where you can modify
alarm limit settings.
Icons on the Home tab
Icons in parameter frames
The icons in the parameter frames indicate alarm notification settings. When alarm limits are on,
the icons will be black and white until an alarm occurs. Then, the icons will change color to
indicate the priority of the alarm. Red icons represent high priority alarms, and amber icons
represent medium or low priority alarms.
60 Alarms Welch Allyn Connex ® Integrated Wall System