Set and start the demo mode, Parameters, Specify advanced nibp settings – Welch Allyn Connex Integrated Wall System - User Manual User Manual
Page 133

3. Select the power line frequency for AC power supplied to the monitor.
4. Do one of the following:
•
To continue in the Advanced Settings, touch another tab.
•
To exit the Advanced Settings and return to the Home tab, touch Exit.
Set and start the demo mode
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code.
d. Touch OK.
The General tab appears.
2. Touch the General tab.
3. Touch the Demo tab.
4. Specify settings.
Setting
Action/Description
Type
Select a type of demonstration mode.
Start
Touch Start to put the monitor in demonstration
mode. Navigate to the Home tab to begin Demo
mode.
5. Do one of the following:
•
To continue in the Advanced Settings, touch another tab.
•
To exit the Demo mode, touch Exit on the Home tab. The monitor restarts automatically.
Parameters
Specify advanced NIBP settings
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code.
d. Touch OK.
The General tab appears.
2. Touch the Parameters tab.
3. Touch the NIBP tab.
4. Specify settings.
Setting
Action/Description
Default view
Select primary and secondary views.
Select
Display MAP
to display mean arterial
pressure (MAP) in the NIBP frame on the Home tab.
Directions for use
Advanced settings 127