Profile feature comparison – Welch Allyn Connex Integrated Wall System - User Manual User Manual
Page 53

Profile feature comparison
The following table compares the features of the profiles.
Feature
Monitor
Spot Check
Triage
Take NIBP, SpO2,
temperature, and pulse
rate readings
X
X
X
Take SpHb readings
(Masimo only)
X
Configure and use interval
timing setting
X
Observe and configure
alarm limits
X
Observe and respond to
physiological alarms
X
Change patient type
(adult, pediatric, neonate)
X
X
X
View and enter manual
parameters (height,
weight, pain, respiration,
temperature*, BMI**)
X
X
Save currently displayed
data to device memory
X
X
X
Save and review patient
data
X
X
X
Access Patients tab
X
X
Access Alarms tab
X
Access Review tab
X
X
X
Access Settings tab
X
X
X
* Braun IR thermometers configured to work with the monitor transfer temperature data automatically to the
Temperature frame. You can enter temperature manually if you take a patient temperature with a
thermometer that is not connected to the monitor, and you have selected temperature as one of the four
manual parameters to display.
** Body Mass Index (BMI) is calculated and transferred to the monitor only by an attached weight scale. You
cannot enter or adjust BMI values. BMI displays on the Manual tab and in the Manual parameters frame if
you have selected it as one of the four parameters to display.
Directions for use
Profiles 47