Welch Allyn Connex Integrated Wall System - User Manual - Manual (Page 47)

Note Observe the remaining battery charge in the battery status indicator and plug the
monitor into a power outlet as soon as you are able.
If the information message is dismissed or you do not take any action to charge the battery, a low
battery alarm condition results. An error message displays in the Device Status area to prompt you
to take action to help prevent the monitor from shutting down due to a critically low battery.
Alarm and information messages
The Device Status area provides alarm and information messages that are either temporary or
exist as long as the condition to which the message applies remains. Alarm or information
messages may also include controls and/or behavior that you can use to manage alarm and
information messages.
When the monitor detects an alarm condition, an alarm message appears. When multiple alarms
occur, the highest priority message appears. You can cycle through each alarm message by
touching the multiple alarm toggle.
Information messages instruct you to interact with the monitor in a specific way or provide
information that does not require action. You can dismiss an information message by selecting the
control associated with the message or waiting for the message to time out.
Content area
The Content area displays vital sign measurements. It also provides shortcuts to several controls.
The Content area includes the following frames:
•
NIBP
• SpO2 with optional SpHb
• Pulse rate
• Temperature
• Patient
• Manual parameters (height, weight, pain, temperature, respiration, and BMI, depending on
configuration)
Directions for use Navigation 41