Welch Allyn Connex Integrated Wall System - User Manual - Manual (Page 7)

Introduction
The Welch Allyn Connex® Integrated Wall System combines the advanced, easy-to-use monitor
capabilities of the Welch Allyn Connex® Vital Signs Monitor 6000 Series with the Welch Allyn 767
Power Handles. This manual (directions for use) is designed to help you understand the
capabilities and operation of the wall system. The information in this manual, including the
illustrations, is based on a wall system configured with non-invasive blood pressure (NIBP), body
temperature, pulse oximetry (SpO2), total hemoglobin concentration (SpHb), pulse rate, weight
scale, and two power handles. If your wall system configuration lacks any of these options, some
information in this manual may not apply.
Before using the wall system, read the sections of the manual that pertain to your use of the
system.
Note
Throughout this directions for use, the Integrated Wall System may be referred to
as a wall system or monitor.
Note Some product features described in this publication might not be available in your
country. For the latest information about products and features, please call Welch
Allyn Customer Care.
Intended use
Handle module assembly
Handles supply power to Welch Allyn 3.5V instruments.
Connex® Vital Signs Monitor patient monitor
The VSM 6000 Series of monitors is intended to be used by clinicians and medically qualified
personnel for monitoring of neonatal, pediatric, and adult patients for
•
noninvasive blood pressure,
• pulse rate,
• noninvasive functional oxygen saturation of arteriolar hemoglobin (SpO2), and
• body temperature in normal and axillary modes
The most likely locations for patients to be monitored are general medical and surgical floors,
general hospital, and alternate care environments.
The optional Masimo Rainbow SET® and accessories are indicated for the continuous noninvasive
monitoring of total hemoglobin concentration of adult, pediatric, and neonatal patients during both
1